TECHCONVINA FACTORY CARE COMPANY LIMITED

 

Library

Energy saving in industry

energy savingIndustry is the major user of energy in modern society, accounting for roughly 40% of final energy use. Coal or oil are heavily used, especially by primary industry and manufacturning and refining. Gas is being used increasingly to replace coal because it is a cleaner fuel producting less impact on the environment. Electricity is only a minor component of industrial energy use although its in driving electric motors is very important.

This document is show clearly this.

Read more...
 

Hazard reporting

Hazard reporting

What is a hazard report?

A hazard report form is used to report a hazardor potential hazard for investigation.

This form is usually submitted to the occupational health and safety representative or supervisor.

Read more...
 

Install a 6.2 Fuel fitter

Fuel fitterThe 6.2 diesel engines were part of the light duty GMC diesel trucks. The diesel fuel filter on a 6.2 engine is a fibered filter that the diesel circulates through. As the diesel circulates through the fuel filter, the fibres on the filter catch impurities from the diesel.

Read more...
 

Program a CNC Milling Machine

milling machine

CNC, or computer numerical control, programming can be done in one of two ways. G code is a universal language that is used by all CNC milling machines and involves the use of a simple lettering system. Most CNC milling machine manufacturers also offer the option of using their proprietary conversational language that is often easier to use but more restrictive if you are using a machine that is of a different make. The CNC control will simply translate the conversational commands to G code for the cutting commands entered.


Read more...
 

How to use mill collets

mill machine

The key to the milling machine's operation is the use of milling cutters. Before the milling cutters can do their job, they need to be connected to the milling machine by some means. One of the more popular means is to employ the use of collets. These expandable and compressible hardened metal adaptors will provide an extension of the power of the milling machine to the cutting tools that are being used.

Read more...
 

How to Design Simple Machines

How to Design Simple Machines

The six simple machines employ basic principles of physical force, and combinations of these machines form the basis of advanced mechanical designs. Because these machines employ only simple principles of force and motion, anyone can learn how simple machines function. If you learn how these six basic machines work, you can design them and use them on their own or as part of more complex machines.

Read more...
 

How to Install a CNC Machine

cnc machineA computer numerical control (CNC) machine is an automated milling machine that makes industrial components without human assistance. It usually needs professional installation as it is often very large and requires a special fork truck to lift it and place it. Once set in place, it is simply a matter of unwrapping it and unlocking the moving parts which can be damaged while being shipped. Installation can take as long as a day, but many CNC machines are capable of being used very soon after being installed, maximizing profitability.

Read more...
   

Principles of a Hydraulic Motor

maintenance

Hydraulic motors provide continuous rotational force and movement via their keyed output shaft to power industrial machinery, agricultural implements such as tractors and harvesters, construction equipment, and various types of special purpose vehicles. Hydraulic power systems, as opposed to shafts, gears, chains, electric motors and wires is much more flexible and cost effective in applications requiring the reliable transmission of high forces and torque at moderate to slow speeds. This is due to the relative ease of conveying a moving fluid under pressure as well as extracting great forces from simple component subsystems.

Read more...
 

How to Fix the Hydraulic on a Backhoe

maintenace

All backhoes are built with several mechanical parts that are powered by a built-in hydraulic system. This hydraulic system allows you to move the backhoe's bucket up and down. A hydraulic motor features a hydraulic ram. The ram is a large cylinder where the motor's piston is located. One of the main causes of hydraulic failure has to do with a leaky hydraulic ram. Repairing the hydraulic system on your backhoe involves replacing the individual cylinder seal on the ram.

Read more...
 

Counterintuitive Maintenance

Maintenance

Looking at your word from a vastly different perspective can be an eve-opening experience. The right mainternance move isn't always the most obvious or the one based on 'gut' feelings.

Read more...
 

Design for maintainability (1)

The pressures of a global market continue to force companies to consider all aspects of product performance in an effort to remain competitive. An important aspect of product performance is maintainability. This START Sheet provides some insights into designing a product for maintainability

Read more...
 

Design for maintainability

The relative ease and economy of time and resources with which an item can be retained in, or restored to, a specified condition when maintenance is performed by personnel having specified skill levels

Read more...
 

Sustained Maintenance Planning

Readiness is the ability of forces or equipment to deliver designed outputs without unacceptable delay. While "readiness" is associated more with combat forces, it can also be used to describe how well an enterprise is poised to impact or respond to commercial marketplaces.

Read more...
 

Maitainability

maintenance

In years past, underground coal mining equipment consisted of simple but rugged machines powered by electric motors and hydraulics. They were maintained by personnel who needed only a basic knowledge of hydraulics,

Read more...
 

Information & News


What you should know about lighting system maintenance (2)
System 1. Group relamping with no interim replacement of lamps is particularly...Read more
07-01-2013
What you should know about lighting system maintenance (1)
Facility owners view lighting maintenance as an absolutely necessary...Read more
20-12-2012
Safety in Automation
Many of today’s legacy manufacturing systems were developed with a...Read more
04-12-2012
How to avoid electrical hazards with air logic
Electrical and electronic devices such as logic circuits, programmable...Read more
15-11-2012